Air Cylinders
Clutch Pumps
Flow Dividers
Hose & Hose Connectors
Hose Clamps
Oil Level Sensors
Power Units
Quick Couplers
Reservoir Accessories
Reservoirs - Frame Mount
Reservoirs - Side Mount
Reservoirs - Upright
Reservoirs - with Integral Brackets
Return Line Manifold
Shift Systems
Sump Strainers
Wetline Kits

Hydraulic Motor - 2 Bolt - 9.7 CIPR

(Click the above images to view full size)
Buyers Products
View Manufacturer Warranty
Price: $284.80
Our Price: $235.40
Quantity level discounts available
Quantity Price (each) Savings
1-1 $235.40 0%
2-9 $214.54 9%
10+ $207.58 12%
Specs & Information
Part Number: CM042P
  • *Maximum intermittent pressure at motor inlet port of 172 Bar [2500 PSI] without regard to A Bar [A PSI] and/or back pressure ratings or combination thereof.
  • Maximum case pressure, without case drain is 103 Bar [1500 PSI]
  • 6B splined or tapered shafts are recommended whenever operating above 282 Nm [2500 lb-in] of torque, especially for those applications subject to frequent reversals.
  • Recommended maximum system operating temperature is 82° C [180° F]
  • To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications.

HydraStar Series motors are economical, efficient, small, compact, and powerful, designed for medium duty applications. These motors have the industry proven spool valve design combined with state-of-the-art gerotors. In addition, a wide variety of mounting flanges with a 1" diameter straight shaft, woodruff keyway, and 1/2" NPT port privdes design flexibility. Direction of shaft rotation and shaft speed can be controlled easily and smoothly throughout the speed range of the motor, and equipment can be driven direct eliminating costly mechanical components.

A simultaneous maximum torque and maximum speed NOT recommended.

Continuous Rating - Motor may be run continuously at these ratings.

Intermittent Operation - 10% of every minute.

Recommended Fluids - Premium quality, anti-wear type hydraulic oil. Minimum oil viscosity (at operating temperature) should be the highest of the following: 100 SUS or (300 + Bar)/RPM = SUS [(20 + PSI )/RPM = SUS]

Recommended Filtration - per ISO Cleanliness Code, level 18/13.